| Case CK15 Hydraulic Final Drive Motor | rs min:2.1 mm; Characteristic outer ring frequency, BPF0:11.63 Hz; e:0.21; Da max:214.8 mm; Number of lubrication holes:3; Static load, C0:893 kN; k:4.5 mm; Fatigue limit load, Cu:76.6 kN; Dynamic load, C:660 kN; d:150 mm; |
| Case 87035450R Reman Hydraulic Final Drive Motor | hidTable:ecat_NSCLDR; ALPHA_:0; B_:23; Oil rpm:8000; DI_:59.5; ra:1; DE_:81.5; hidYobi:NUP2210ET7; C0:97; GRS rpm:6300; |
| Case 151827A1 Hydraulic Final Drive Motor | d:61.91 mm; C:81.6 kN; Recommended tightening torque for set screw:16.8 Nm; L3:123 mm; A2:46 mm; L2:25 mm; G:M6x1; T min.:-20 °C; Weight:7.86 kg; L1:135 mm; |
| Case CX240BLR Hydraulic Final Drive Motor | s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; H:33.3 mm; S:12.7 mm; A1:19 mm; H2:64 mm; d:19.05 mm; L:65 mm; A:32 mm; N:M8; |
| Case 160558A1 Hydraulic Final Drive Motor | rs min:2.1 mm; Characteristic outer ring frequency, BPF0:11.63 Hz; e:0.21; Da max:214.8 mm; Number of lubrication holes:3; Static load, C0:893 kN; k:4.5 mm; Fatigue limit load, Cu:76.6 kN; Dynamic load, C:660 kN; d:150 mm; |
| Case 9030 Hydraulic Final Drive Motor | T max.:200 °C; d:15 mm; H1:15 mm; G:M6x1; N:13mm; T min.:-20 °C; B1:28.6 mm; N1:19 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES202G2T20; |
| Case IH 2577 Reman Hydraulic Final Drive Motor | T max.:200 °C; d:15 mm; H1:15 mm; G:M6x1; N:13mm; T min.:-20 °C; B1:28.6 mm; N1:19 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES202G2T20; |
| Case CX35 Hydraulic Final Drive Motor | rs min:2.1 mm; Characteristic outer ring frequency, BPF0:11.63 Hz; e:0.21; Da max:214.8 mm; Number of lubrication holes:3; Static load, C0:893 kN; k:4.5 mm; Fatigue limit load, Cu:76.6 kN; Dynamic load, C:660 kN; d:150 mm; |
| Case 16364A1 Hydraulic Final Drive Motor | d:61.91 mm; C:81.6 kN; Recommended tightening torque for set screw:16.8 Nm; L3:123 mm; A2:46 mm; L2:25 mm; G:M6x1; T min.:-20 °C; Weight:7.86 kg; L1:135 mm; |
| Case CK75 Aftermarket Hydraulic Final Drive Motor | s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; H:33.3 mm; S:12.7 mm; A1:19 mm; H2:64 mm; d:19.05 mm; L:65 mm; A:32 mm; N:M8; |
| Case CX32 Hydraulic Final Drive Motor | s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; H:33.3 mm; S:12.7 mm; A1:19 mm; H2:64 mm; d:19.05 mm; L:65 mm; A:32 mm; N:M8; |
| Case 87035451R Reman Hydraulic Final Drive Motor | G:R1/8"; Weight:0.62 kg; Designation of housing:EHE204-; d1:32.4 mm; G1:M16; B:34 mm; C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; H:65 mm; |
| Case CK130 Hydraulic Final Drive Motor | S:17.5 mm; B:42.9 mm; Z:48.8 mm; Recommended tightening torque for set screw:11.5 Nm; G:M6x1; Designation of bearing:UC207G2L3; s1:21.45 mm; Designation of housing:FC207N-; Weight:1.73 kg; A2:36.4 mm; |
| Case 162165A1 Hydraulic Final Drive Motor | rs min:2.1 mm; Characteristic outer ring frequency, BPF0:11.63 Hz; e:0.21; Da max:214.8 mm; Number of lubrication holes:3; Static load, C0:893 kN; k:4.5 mm; Fatigue limit load, Cu:76.6 kN; Dynamic load, C:660 kN; d:150 mm; |