No. | Brand | d | C | e | S | B | a | H | N |
KSA10100 | Sumitomo | - | - | - | - | - | - | - | - |
SH350HD | Sumitomo | - | 31.85 kN | 2 mm | - | 41.2 mm | - | - | 14mm |
SH300LC | Sumitomo | - | - | - | - | - | 72 | - | - |
SH350-5 | Sumitomo | - | - | - | 30.9 mm | 61.8 mm | - | 69.8 mm | M16 |
SH350LHD | Sumitomo | - | - | - | - | - | - | - | - |
SH330-3B | Sumitomo | 140 | 550 | - | - | - | - | - | - |
SH330-3 | Sumitomo | - | - | - | - | - | - | - | - |
SH330LC-3 | Sumitomo | - | - | - | - | - | - | - | - |
SH120 | Sumitomo | 140 | 550 | - | - | - | - | - | - |
SH75U | Sumitomo | - | 31.85 kN | 2 mm | - | 41.2 mm | - | - | 14mm |
SH160 | Sumitomo | - | - | - | - | - | - | - | - |
SH300-5 | Sumitomo | - | - | - | - | - | 72 | - | - |
SH330 | Sumitomo | - | - | - | - | - | 72 | - | - |
SH300-3 | Sumitomo | 47.62 mm | - | - | - | - | - | - | - |
SH330LC | Sumitomo | 47.62 mm | - | - | - | - | - | - | - |
SH290 | Sumitomo | - | - | - | - | - | - | - | - |
Sumitomo SH330 Hydraulic Final Drive Motor | SRIN:0; SBRG:2; a:72; ALP23:0; ra:2.5; SREN:0; Oil rpm:3200; C0:193; yobi:7226A; m0:1.198; |
Sumitomo SH330LC Hydraulic Final Drive Motor | Weight:2.9 kg; L:200 mm; s1:42.9 mm; d1:67.2 mm; H2:115 mm; A1:34 mm; T max.:200 °C; Designation of housing:PE210-; C0:23.2 kN; d:47.62 mm; |
Sumitomo SH300-5 Hydraulic Final Drive Motor | SRIN:0; SBRG:2; a:72; ALP23:0; ra:2.5; SREN:0; Oil rpm:3200; C0:193; yobi:7226A; m0:1.198; |
Sumitomo SH290 Hydraulic Final Drive Motor | Other Features:Deep Groove; Long Description:17MM Bore; 26MM Outs; Brand:NTN; Enclosure:Open; Rolling Element:Ball Bearing; Characteristic outer ring frequency, BPF0:7.11 Hz; Mass:0.008 kg; Weight / LBS:0.018; Inch - Metric:Metric; Snap Ring:No; |
Sumitomo KSA10100 Hydraulic Final Drive Motor | UPC:782476603427; Bearing Bore Shape:Round; End Cap Groove:Yes; Bearing Locking Device:Setscrew; Max Bearing Speed:4500 rpm; Brand:Baldor-Dodge; Flinger Type:Rubberized; Shaft Attachment (2):Set Screw; Manufacturing Plant Location:Rogersville, TN; Housing Coating:No Coating; |
Sumitomo SH350LHD Hydraulic Final Drive Motor | da:89; KBRG:1354; groove inner:96.702; hidYobi:2216K; X2:0.65; SREN:0; Y0:2.7; r:2; B_:33; SRIN:0; |
Sumitomo SH300-3 Hydraulic Final Drive Motor | Weight:2.9 kg; L:200 mm; s1:42.9 mm; d1:67.2 mm; H2:115 mm; A1:34 mm; T max.:200 °C; Designation of housing:PE210-; C0:23.2 kN; d:47.62 mm; |
Sumitomo SH350HD Hydraulic Final Drive Motor | N:14mm; T min.:-40 °C; C0:20.8 kN; C:31.85 kN; e:2 mm; Designation of housing:FCE209-; B:41.2 mm; H3:105; Weight:1.85 kg; Recommended tightening torque for set screw:11.5 Nm; |
Sumitomo SH350-5 Hydraulic Final Drive Motor | N:M16; H2:138 mm; Designation of housing:PG212-; Recommended tightening torque for set screw:16.8 Nm; H:69.8 mm; T min.:-40 °C; H1:25 mm; B1:77.7 mm; B:61.8 mm; S:30.9 mm; |
Sumitomo SH300LC Hydraulic Final Drive Motor | SRIN:0; SBRG:2; a:72; ALP23:0; ra:2.5; SREN:0; Oil rpm:3200; C0:193; yobi:7226A; m0:1.198; |
Sumitomo SH330-3 Hydraulic Final Drive Motor | da:89; KBRG:1354; groove inner:96.702; hidYobi:2216K; X2:0.65; SREN:0; Y0:2.7; r:2; B_:33; SRIN:0; |
Sumitomo SH75U Aftermarket Hydraulic Final Drive Motor | N:14mm; T min.:-40 °C; C0:20.8 kN; C:31.85 kN; e:2 mm; Designation of housing:FCE209-; B:41.2 mm; H3:105; Weight:1.85 kg; Recommended tightening torque for set screw:11.5 Nm; |
Sumitomo SH330-3B Hydraulic Final Drive Motor | GRS rpm:2200; C:550; r:3; ALPHA_:0; LangID:1; Prod_Type3:CRB_SR_NJ; DI_:169; da:153; yobi:NJ2228EM; d:140; |
Sumitomo SH120 Hydraulic Final Drive Motor | GRS rpm:2200; C:550; r:3; ALPHA_:0; LangID:1; Prod_Type3:CRB_SR_NJ; DI_:169; da:153; yobi:NJ2228EM; d:140; |
Sumitomo SH330LC-3 Hydraulic Final Drive Motor Video