| No. | Brand | d | G | N | J | A | H | D | B |
| 308CCR | Caterpillar | - | - | 13mm | 95 mm | - | - | - | - |
| 320D2L | Caterpillar | 36.51 mm | - | - | 127 mm | - | 95 mm | - | - |
| 280-7864 | Caterpillar | - | M6x1 | 14mm | 119 mm | 41.5 mm | - | - | - |
| 304CCR | Caterpillar | - | M6x1 | 14mm | 119 mm | 41.5 mm | - | - | - |
| 323D | Caterpillar | - | - | - | - | - | - | - | - |
| 312C | Caterpillar | - | - | - | 315 mm | 76 mm | - | - | 96 mm |
| 295-8370 | Caterpillar | - | - | 13mm | 95 mm | - | - | - | - |
| 301.8 | Caterpillar | 30 mm | M6x1 | - | - | - | - | - | - |
| 311 | Caterpillar | - | M6x1 | 14mm | 119 mm | 41.5 mm | - | - | - |
| 313D2 | Caterpillar | - | M6x1 | 14mm | 119 mm | 41.5 mm | - | - | - |
| 312E | Caterpillar | - | - | 17mm | 121 mm | 48 mm | - | - | - |
| 320ERR | Caterpillar | - | - | - | - | - | - | - | - |
| 325C | Caterpillar | - | - | 11mm | - | 36.5 mm | - | - | - |
| 302.5 | Caterpillar | - | - | - | - | - | - | - | - |
| 312D2GC | Caterpillar | - | M6x1 | 14mm | 119 mm | 41.5 mm | - | - | - |
| 322 | Caterpillar | - | - | - | - | - | - | - | - |
| 308E2SR | Caterpillar | 15 mm | - | - | - | - | - | 35 mm | - |
| 280-7854 | Caterpillar | 15 mm | - | - | - | - | - | 35 mm | - |
| 308CR | Caterpillar | 15 mm | - | - | - | - | - | 35 mm | - |
| 312F | Caterpillar | - | - | - | - | - | - | 140 mm | - |
| 32CL | Caterpillar | - | M6x1 | 14mm | 119 mm | 41.5 mm | - | - | - |
| 307D | Caterpillar | - | - | 11mm | - | 36.5 mm | - | - | - |
| 307A | Caterpillar | - | - | - | 315 mm | 76 mm | - | - | 96 mm |
| 325BLN | Caterpillar | - | - | 17mm | 121 mm | 48 mm | - | - | - |
| Caterpillar 304DCR Hydraulic Final Drive Motor | d1:145 mm; Category:Roller Bearings; Bearing ring (inner ring) WS mass:0.38 kg; rs min:1 mm; Manufacturer Name:NTN; Brand:NTN; Product Group:B04144; Minimum Buy Quantity:N/A; Weight / Kilogram:0.371; Min operating temperature, Tmin:-20 °C; |
| Caterpillar 321B Hydraulic Final Drive Motor | Nlim (grease):15,000 rpm; D:35 mm; Max operating temperature, Tmax:110 °C; da max:20 mm; Characteristic inner ring frequency, BPFI:4.39 Hz; ra max:0.6 mm; Da max:31 mm; da min:19 mm; Characteristic cage frequency, FTF:0.37 Hz; d:15 mm; |
| Caterpillar 300-4246 Hydraulic Final Drive Motor | L3:83 mm; G:M6x1; L:144 mm; A5:30.2 mm; N2:49 mm; H:117 mm; N:29mm; L2:16 mm; H1:102 mm; H2:83 mm; |
| Caterpillar 308ECR Aftermarket Hydraulic Final Drive Motor | J:121 mm; Weight:1.27 kg; L:165 mm; T max.:100 °C; T min.:-40 °C; N:17mm; s1:15 mm; Recommended tightening torque for set screw:5.5 Nm; N1:21 mm; A:48 mm; |
| Caterpillar 280-3097 Hydraulic Final Drive Motor | Recommended tightening torque for set screw:54.5 Nm; A1:36 mm; A:76 mm; C0:108 kN; J:315 mm; S:40 mm; Designation of housing:FL318-; T min.:-20 °C; C:143 kN; B:96 mm; |
| Caterpillar 305.5CCR Hydraulic Final Drive Motor | J:121 mm; Weight:1.27 kg; L:165 mm; T max.:100 °C; T min.:-40 °C; N:17mm; s1:15 mm; Recommended tightening torque for set screw:5.5 Nm; N1:21 mm; A:48 mm; |
| Caterpillar 313D2 Hydraulic Final Drive Motor | N1:24.5 mm; N:14mm; Weight:1.04 kg; L:161.5 mm; S:8 mm; J:119 mm; H2:79.5 mm; G:M6x1; A:41.5 mm; H1:14.5 mm; |
| Caterpillar 318EL Hydraulic Final Drive Motor | H2:140 mm; H:95 mm; L1:56 mm; d:36.51 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; N1:21 mm; J:127 mm; Weight:2.17 kg; S:8.5 mm; |
| Caterpillar 319DLN Hydraulic Final Drive Motor | H2:140 mm; H:95 mm; L1:56 mm; d:36.51 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; N1:21 mm; J:127 mm; Weight:2.17 kg; S:8.5 mm; |
| Caterpillar 323ESA Hydraulic Final Drive Motor | N1:24.5 mm; N:14mm; Weight:1.04 kg; L:161.5 mm; S:8 mm; J:119 mm; H2:79.5 mm; G:M6x1; A:41.5 mm; H1:14.5 mm; |
| Caterpillar 2Y-6932 Hydraulic Final Drive Motor | H2:140 mm; H:95 mm; L1:56 mm; d:36.51 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; N1:21 mm; J:127 mm; Weight:2.17 kg; S:8.5 mm; |
| Caterpillar 305.5 Hydraulic Final Drive Motor | Recommended tightening torque for set screw:54.5 Nm; A1:36 mm; A:76 mm; C0:108 kN; J:315 mm; S:40 mm; Designation of housing:FL318-; T min.:-20 °C; C:143 kN; B:96 mm; |
| Caterpillar 303C CR Hydraulic Final Drive Motor | Inventory:0.0; E:139.5 mm; Max operating temperature, Tmax:120 °C; rs min:2.1 mm; Brand:NTN; Product Group:B04270; Mass (without HJ ring):3.49 kg; da max:93 mm; Da max:149 mm; r1a max:2 mm; |
| Caterpillar 307 Aftermarket Hydraulic Final Drive Motor | J:121 mm; Weight:1.27 kg; L:165 mm; T max.:100 °C; T min.:-40 °C; N:17mm; s1:15 mm; Recommended tightening torque for set screw:5.5 Nm; N1:21 mm; A:48 mm; |
Caterpillar 325BLN Hydraulic Final Drive Motor Video