| M4-34P4Z Rotek Slewing Ring Bearings | d:360 mm; r1,2 min.:5 mm; ra max.:4 mm; b1:9.4 mm; D:540 mm; das:402 mm; Da max.:519 mm; d1 ≈:412 mm; s max.:11 mm; B:243 mm; r3,4 min.:5 mm; D1 ≈:486 mm; K:5 mm; Limiting speed:630 r/min; Basic dynamic load rating C:4180 kN; Calculation factor kr:0.5; Fatigue load limit Pu:735 kN; Mass bearing:195 kg; da min.:383 mm; rb max.:4 mm; |
| 3R6-48E3B Rotek Slewing Ring Bearings | da:49.212 mm; R2:25.4 mm; H2:30.163 mm; Appropriate attachment bolt size G:0.625 in; Cap bolt, SAE grade:8; N1:19.05 mm; A1:79.375 mm; Da:120 mm; ba:36.513 mm; P60°:43.1 kN; H:157.162 mm; H1:82.55 mm; P90°:25.8 kN; Ca:52.807 mm; J max.:241.3 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt:2 x 1/2-13 UNC; R1:44.45 mm; Pa:6.94 kN; Max. speed for Taconite seal:1575 r/min; |
| A16-53E1A Rotek Slewing Ring Bearings | Sealed Speed Rating n3:0 rpm; Oil Speed Rating Open/Shielded n2:3400 rpm; D:200.0000 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; Fillet Radius ra:1.00 mm; B:20.00 mm; d:160.000 mm; Basic Static Radial Load Rating Co:60000 N; Basic Dynamic Radial Load Rating C:49400 N; Accessories:One Seal; |
| R9-55E3 Rotek Slewing Ring Bearings | ba max.:136 mm; End cover:ETS 48; Cap bolt, size:M 30x180; P90°:2000 kN; s:12 mm; P55°:4200 kN; J:600 mm; N4 max.:20 mm; Labyrinth seal:2 x TS 48/200; A1:260 mm; H1:240 mm; Initial grease fill, 40%:3 kg; Q180°:1430 kN; bc:141.5 mm; Bearing (basic designation):23244 K; Cap bolt, rec. tightening torque:400 N·m; P120°:1500 kN; ATS:315 mm; N1:35 mm; J1:150 mm; |
| A14-48E22 Rotek Slewing Ring Bearings | Cage Type:Brass; Oil Limiting Speed (r/min):3300; B:68.3mm; Grease Limiting Speed (r/min):2400; Availability:In Stock; Seals or Shields:Open Type; d:80mm; SKU:3316mc3-nsk; Static Load Rating (kN):224000; Weight:6.93 KGS; Clearance:C3; D:170mm; Dynamic Load Rating (kN):229000; |
| A18-46E4D Rotek Slewing Ring Bearings | r1 min.:0.3 mm; Material constant KM:330; d4 max.:12 mm; B:8 mm; α:13 °; Mass rod end:0.017 kg; h1:27 mm; l3 min.:8 mm; l7 min.:9 mm; Basic dynamic load rating C:3.25 kN; d3 ≈:9 mm; G:M 4; l4 max.:37 mm; w:9 mm; d:5 mm; dk:11.1 mm; Basic static load rating C0:5.4 kN; d2 max.:19 mm; C1 max.:7.5 mm; l5 ≈:4 mm; |
| L6-37E9Z Rotek Slewing Ring Bearings | Availability:In Stock; D:160mm; B:43mm; Cage Type:Plastic; SKU:21318-e1-tvpb-c3-qbl; Seals or Shields:Open Type; Weight:0.02 KGS; Clearance:C3; d:90mm; |
| M7-42P1 Rotek Slewing Ring Bearings | D:21 mm; Mass bushing:0.015 kg; Coefficient of friction µ min.:0.05; d:15 mm; B1:3 mm; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Tolerance shaft:h8; B:10 mm; Permissible sliding velocity v min.:0.25 m/s; Specific dynamic load factor K:10 N/mm²; D1:27 mm; |
| R9-59E3 Rotek Slewing Ring Bearings | SKU:6306zznr-nsk; Seals or Shields:Two Metal Shields; Availability:In Stock; Dynamic Load Rating (kN):26.7; d:30mm; Clearance:Standard; B:19mm; D:72mm; Weight:0.02 KGS; Fatigue Load Rating (kN):--; Cage Type:Steel; Reference Speed Rating (r/min):--; Static Load Rating (kN):15; Limiting Speed Rating (r/min):9500; |
| M4-26P4Z Rotek Slewing Ring Bearings | Hexagonal key size for grub screw N:3.969 mm; B4:6 mm; A3:3.2 mm; R1:22 mm; B:42.9 mm; Thread grub screw G2:5/16-24 UNF; A1:13 mm; Housing:FYTB 507 M/VZ033; Housing material:Cast iron; s1:25.4 mm; Db1:88 mm; Db2:96 mm; RG:1/4-28 UNF; Rα:45 °; Basic static load rating C0:15.3 kN; T:46.4 mm; H:156 mm; Recommended diameter for attachment bolts, mm G:12 mm; Fatigue load limit Pu:0.655 kN; A:34.5 mm; |