| 933628601 Liebherr LH60 M Slewing Ring | r1 min.:0.6 mm; Lubricant:Regular relubricatio; b:3.1 mm; M:2 mm; α:7 °; r2 min.:0.6 mm; B:20 mm; Specific dynamic load factor K:100 N/mm²; d:25 mm; Da min.:36.9 mm; b1:3.1 mm; Sealing solution:Triple-lip seals; ra max.:0.6 mm; Specific static load factor K0:500 N/mm²; dk:35.5 mm; da min.:28.2 mm; Basic static load rating C0:240 kN; rb max.:0.6 mm; C:16 mm; D:42 mm; |
| 982706001 Liebherr A922 Li Slewing Ring | Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:200000 N; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:225000 N; d:100.000 mm; Grease Speed Rating Open/Shielded n1:2500 rpm; Sealed Speed Rating n3:1800 rpm; D:265.0000 mm; Oil Speed Rating Open/Shielded n2:3100 rpm; B:60.00 mm; |
| 982752101 Liebherr R944B Slewing Ring | B:116.00 mm; Grease Speed Rating n1:1500 rpm; d:130.000 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:610000 N; D:280.0000 mm; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:2000 rpm; Basic Dynamic Radial Load Rating C:449000 N; |
| 982882001 Liebherr A308 Slewing Ring | Initial grease fill:136.08 g; L:285.75 mm; H2:28.575 mm; Cap bolt, SAE grade:5; Cap bolt:2 x 1/2-13 UNC; P120°:28 kN; ba:30.163 mm; P180°:30.2 kN; RG:1/4 NPT; J max.:244.475 mm; Da:130 mm; Stabilizing ring:2 x SR-15-0; Mass pillow block:13.1 kg; Appropriate attachment bolt size G:0.625 in; Ca:37.008 mm; PG:1/8 NPT; N1:19.05 mm; H:157.559 mm; PosiTrac Plus contact element:2 x B10724-37; Max. speed for PosiTrac Plus seal:2350 r/min; |
| 933816501 Liebherr R934C Slewing Ring | Fw:50 mm; U:13.5 mm; Ew:55 mm; Basic dynamic load rating C:17.6 kN; Basic static load rating C0:36.5 kN; Limiting speed:9500 r/min; Mass needle roller and cage assembly:0.03 kg; Fatigue load limit Pu:4.3 kN; Reference speed:8500 r/min; |
| 933628601 Liebherr LH60 MT Slewing Ring | Ew:65 mm; Mass needle roller and cage assembly:0.052 kg; Reference speed:7000 r/min; Basic dynamic load rating C:28.1 kN; U:20 mm; Fw:60 mm; Fatigue load limit Pu:8.8 kN; Limiting speed:8000 r/min; Basic static load rating C0:72 kN; |
| 982855001 Liebherr A932 Li Slewing Ring | d3:165 mm; Da max.:201 mm; r1,2 min.:2 mm; Basic static load rating C0:680 kN; b:8.3 mm; Limiting speed:3400 r/min; d1:125 mm; Fatigue load limit Pu:68 kN; d2 ≈:158 mm; Calculation factor Y1:3; Calculation factor Y0:2.8; B:53 mm; K:4.5 mm; ra max.:2 mm; B4:24 mm; B1:82 mm; Ba min.:8 mm; da max.:158 mm; D1 ≈:190 mm; Basic dynamic load rating C:485 kN; |
| 982752101 Liebherr A944 Li Slewing Ring | a:43 mm; r1,2 min.:0.3 mm; D2:26.3 mm; D:32 mm; Fatigue load limit Pu:0.8 kN; Attainable speed:6800 r/min; rb max.:0.6 mm; ra max.:0.3 mm; Da max.:26 mm; Preload:300 N; Static moment stiffness:20 N·m/mrad; Static axial stiffnes:270 N/µm; Frictional moment:0.08 N·m; r3,4 min.:0.6 mm; d2:17.7 mm; H:20 mm; Mass bearing:0.09 kg; K:2 mm; Basic dynamic load rating C:14.6 kN; d:8 mm; |
| 982853501 Liebherr R310 Slewing Ring | Basic Static Radial Load Rating Co:186000 N; D:150.0000 mm; Oil Speed Rating n2:3800 rpm; Sealed Speed Rating n3:2800 rpm; d:70.000 mm; Accessories:Shield & Seal & Snap; B:63.50 mm; Grease Speed Rating n1:2800 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:172000 N; |
| 933816501 Liebherr R934B Slewing Ring | Hexagonal key size for grub screw N:3.969 mm; Thread grub screw G2:5/16-24 UNF; A1:16.1 mm; H:157 mm; Mass bearing unit:0.77 kg; T:47.1 mm; Recommended diameter for attachment bolts, mm G:12 mm; J:50.8 mm; Recommended tightening torque for grub screw:6.5 N·m; L1:89 mm; Limiting speed with shaft tolerance h6:3200 r/min; Fatigue load limit Pu:0.655 kN; Bearing:YAR 207-104-2RF/VE49; N:13.1 mm; |